trait AudioParam extends EventTarget with AudioNode
The AudioParam interface represents an audio-related parameter, usually a parameter of an AudioNode (such as GainNode.gain). An AudioParam can be set to a specific value or a change in value, and can be scheduled to happen at a specific time and following a specific pattern.
There are two kinds of AudioParam, a-rate and k-rate parameters:
- An a-rate AudioParam takes the current audio parameter value for each sample frame of the audio signal.
- A k-rate AudioParam uses the same initial audio parameter value for the whole block processed, that is 128 sample frames.
Each AudioNode defines which of its parameters are a-rate or k-rate in the spec.
Each AudioParam has a list of events, initially empty, that define when and how values change. When this list is not empty, changes using the AudioParam.value attributes are ignored. This list of events allows us to schedule changes that have to happen at very precise times, using arbitrary timelime-based automation curves. The time used is the one defined in AudioContext.currentTime.
- Annotations
- @JSType() @native()
- Alphabetic
- By Inheritance
- AudioParam
- AudioNode
- EventTarget
- Object
- Any
- AnyRef
- Any
- Hide All
- Show All
- Public
- All
Value Members
-
final
def
!=(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
final
def
##(): Int
- Definition Classes
- AnyRef → Any
-
final
def
==(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
def
addEventListener[T <: Event](type: String, listener: Function1[T, _], options: EventListenerOptions): Unit
The EventTarget.addEventListener() method registers the specified listener on the EventTarget it's called on.
The EventTarget.addEventListener() method registers the specified listener on the EventTarget it's called on. The event target may be an Element in a document, the Document itself, a Window, or any other object that supports events (such as XMLHttpRequest).
This implementation accepts a settings object of type EventListenerOptions.
MDN
- Definition Classes
- EventTarget
-
def
addEventListener[T <: Event](type: String, listener: Function1[T, _], useCapture: Boolean = js.native): Unit
The EventTarget.addEventListener() method registers the specified listener on the EventTarget it's called on.
The EventTarget.addEventListener() method registers the specified listener on the EventTarget it's called on. The event target may be an Element in a document, the Document itself, a Window, or any other object that supports events (such as XMLHttpRequest).
MDN
- Definition Classes
- EventTarget
-
final
def
asInstanceOf[T0]: T0
- Definition Classes
- Any
-
def
cancelScheduledValues(startTime: Double): Unit
Cancels all scheduled future changes to the AudioParam.
Cancels all scheduled future changes to the AudioParam.
- startTime
A double representing the exact time (in seconds) after the AudioContext was first created after which all scheduled changes will be cancelled.
-
val
channelCount: Int
Represents an integer used to determine how many channels are used when up-mixing and down-mixing connections to any inputs to the node.
Represents an integer used to determine how many channels are used when up-mixing and down-mixing connections to any inputs to the node. Its usage and precise definition depend on the value of AudioNode.channelCountMode.
- Definition Classes
- AudioNode
-
val
channelCountMode: Int
Represents an enumerated value describing the way channels must be matched between the node's inputs and outputs.
Represents an enumerated value describing the way channels must be matched between the node's inputs and outputs.
- Definition Classes
- AudioNode
-
val
channelInterpretation: String
Represents an enumerated value describing the meaning of the channels.
Represents an enumerated value describing the meaning of the channels. This interpretation will define how audio up-mixing and down-mixing will happen.
The possible values are "speakers" or "discrete".
- Definition Classes
- AudioNode
-
def
clone(): AnyRef
- Attributes
- protected[lang]
- Definition Classes
- AnyRef
- Annotations
- @throws( ... ) @native()
-
def
connect(audioParam: AudioParam): Unit
Allows us to connect one output of this node to one input of an audio parameter.
Allows us to connect one output of this node to one input of an audio parameter.
- Definition Classes
- AudioNode
-
def
connect(audioNode: AudioNode): Unit
Allows us to connect one output of this node to one input of another node.
Allows us to connect one output of this node to one input of another node.
- Definition Classes
- AudioNode
-
val
context: AudioContext
Returns the associated AudioContext, that is the object representing the processing graph the node is participating in.
Returns the associated AudioContext, that is the object representing the processing graph the node is participating in.
- Definition Classes
- AudioNode
-
val
defaultValue: Double
Represents the initial value of the attributes as defined by the specific AudioNode creating the AudioParam.
-
def
disconnect(output: AudioNode = js.native): Unit
Allows us to disconnect the current node from another one it is already connected to.
Allows us to disconnect the current node from another one it is already connected to.
- output
The index describing which output of the AudioNode is going to be disconnected.
- Definition Classes
- AudioNode
-
def
dispatchEvent(evt: Event): Boolean
Dispatches an Event at the specified EventTarget, invoking the affected EventListeners in the appropriate order.
Dispatches an Event at the specified EventTarget, invoking the affected EventListeners in the appropriate order. The normal event processing rules (including the capturing and optional bubbling phase) apply to events dispatched manually with dispatchEvent().
MDN
- Definition Classes
- EventTarget
-
final
def
eq(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
-
def
equals(arg0: Any): Boolean
- Definition Classes
- AnyRef → Any
-
def
exponentialRampToValueAtTime(value: Double, endTime: Double): Unit
Schedules a gradual exponential change in the value of the AudioParam.
Schedules a gradual exponential change in the value of the AudioParam. The change starts at the time specified for the previous event, follows an exponential ramp to the new value given in the value parameter, and reaches the new value at the time given in the endTime parameter.
- value
A floating point number representing the value the AudioParam will ramp up to by the given time.
- endTime
A double representing the exact time (in seconds) after the ramping starts that the changing of the value will stop.
-
def
finalize(): Unit
- Attributes
- protected[lang]
- Definition Classes
- AnyRef
- Annotations
- @throws( classOf[java.lang.Throwable] )
-
final
def
getClass(): Class[_]
- Definition Classes
- AnyRef → Any
- Annotations
- @native()
-
def
hasOwnProperty(v: String): Boolean
- Definition Classes
- Object
-
def
hashCode(): Int
- Definition Classes
- AnyRef → Any
- Annotations
- @native()
-
final
def
isInstanceOf[T0]: Boolean
- Definition Classes
- Any
-
def
isPrototypeOf(v: Object): Boolean
- Definition Classes
- Object
-
def
linearRampToValueAtTime(value: Double, endTime: Double): Unit
Schedules a gradual linear change in the value of the AudioParam.
Schedules a gradual linear change in the value of the AudioParam. The change starts at the time specified for the previous event, follows a linear ramp to the new value given in the value parameter, and reaches the new value at the time given in the endTime parameter.
- value
A floating point number representing the value the AudioParam will ramp up to by the given time.
- endTime
A double representing the exact time (in seconds) after the ramping starts that the changing of the value will stop.
-
final
def
ne(arg0: AnyRef): Boolean
- Definition Classes
- AnyRef
-
final
def
notify(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
-
final
def
notifyAll(): Unit
- Definition Classes
- AnyRef
- Annotations
- @native()
-
val
numberOfInputs: Int
Returns the number of inputs feeding the node.
Returns the number of inputs feeding the node. Source nodes are defined as nodes having a numberOfInputs property with a value of 0.
- Definition Classes
- AudioNode
-
val
numberOfOutputs: Int
Returns the number of outputs coming out of the node.
Returns the number of outputs coming out of the node. Destination nodes — like AudioDestinationNode — have a value of 0 for this attribute.
- Definition Classes
- AudioNode
-
def
propertyIsEnumerable(v: String): Boolean
- Definition Classes
- Object
-
def
removeEventListener[T <: Event](type: String, listener: Function1[T, _], options: EventListenerOptions): Unit
Removes the event listener previously registered with EventTarget.addEventListener.
Removes the event listener previously registered with EventTarget.addEventListener.
This implementation accepts a settings object of type EventListenerOptions.
MDN
- Definition Classes
- EventTarget
-
def
removeEventListener[T <: Event](type: String, listener: Function1[T, _], useCapture: Boolean = js.native): Unit
Removes the event listener previously registered with EventTarget.addEventListener.
Removes the event listener previously registered with EventTarget.addEventListener.
MDN
- Definition Classes
- EventTarget
-
def
setTargetAtTime(target: Double, startTime: Double, timeConstant: Double): Unit
Schedules the start of a change to the value of the AudioParam.
Schedules the start of a change to the value of the AudioParam. The change starts at the time specified in startTime and exponentially moves towards the value given by the target parameter. The exponential decay rate is defined by the timeConstant parameter, which is a time measured in seconds.
- target
The value the parameter will start to transition towards at the given start time.
- startTime
The time that the exponential transition will begin, which will be relative to AudioContext.currentTime.
- timeConstant
The time-constant value of first-order filter (exponential) approach to the target value. The larger this value is, the slower the transition will be.
-
def
setValueAtTime(value: Double, startTime: Double): Unit
Schedules an instant change to the value of the AudioParam at a precise time, as measured against AudioContext.currentTime.
Schedules an instant change to the value of the AudioParam at a precise time, as measured against AudioContext.currentTime. The new value is given in the value parameter.
- value
A floating point number representing the value the AudioParam will change to at the given time.
- startTime
A double representing the exact time (in seconds) after the AudioContext was first created that the change in value will happen.
-
def
setValueCurveAtTime(values: Float32Array, startTime: Double, duration: Double): Unit
Schedules the values of the AudioParam to follow a set of values, defined by the values Float32Array scaled to fit into the given interval, starting at startTime, and having a specific duration.
Schedules the values of the AudioParam to follow a set of values, defined by the values Float32Array scaled to fit into the given interval, starting at startTime, and having a specific duration.
- values
A Float32Array representing the value curve the AudioParam will change through along the duration.
- startTime
A double representing the exact time (in seconds) after the AudioContext was first created that the change in value will happen.
- duration
A double representing the exact time (in seconds) during which the values will be changed between. The values are spaced equally along this duration.
-
final
def
synchronized[T0](arg0: ⇒ T0): T0
- Definition Classes
- AnyRef
-
def
toLocaleString(): String
- Definition Classes
- Object
-
def
toString(): String
- Definition Classes
- AnyRef → Any
-
val
value: Double
Represents the parameter's current floating point value; initially set to the value of AudioParam.defaultValue.
Represents the parameter's current floating point value; initially set to the value of AudioParam.defaultValue. Though it can be set, any modifications happening while there are automation events scheduled — that is events scheduled using the methods of the AudioParam — are ignored, without raising any exception.
-
def
valueOf(): Any
- Definition Classes
- Object
-
final
def
wait(): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws( ... )
-
final
def
wait(arg0: Long, arg1: Int): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws( ... )
-
final
def
wait(arg0: Long): Unit
- Definition Classes
- AnyRef
- Annotations
- @throws( ... ) @native()